MSF30413 - Certificate III in Glass and Glazing

Experience in glass and glazing? Get it recognised.

If you've been employed in the Glass and Glazing field, processing thin glass by hand, operating a glass freefall rack and table, and moving glass sheets by mechanical means, it is a good probability that you already know everything required to gain formal recognition.

Whether you're interested in entering the field of Glass and Glazing, gaining certification, or expanding your employment opportunities, your skills in storing and handling glass, processing thick glass, working with stained and leaded glass, and fabricating and installing commercial glazing hold high value.

Frame your future in Glass and Glazing for a clear view ahead.

See if you’re eligible today with our Free Skills Review.

RPL Cost Traditional study cost Your savings
$2,900* $9,000 $6,100

Want to save a further $580 off this qualification? Contact us today to learn how!

* RPL cost includes all assessment services and issue of your nationally recognised qualification.

Want to know if you’re eligible to obtain this qualification via Skills Recognition & RPL? Then why not start a Free Skills Review, it requires only 3 minutes to complete!

Take the initiative today to determine your eligibility.

Yes. All of our qualifications are issued by RTOs which have been approved by the Australian Skills Quality Authority (ASQA) to deliver nationally recognised qualifications that meet national quality assurance requirements. This means that they are recognised by industry and educational institutions in all Australian states and territories as conforming to the required competency standards.

Yes. Because all of our qualifications are issued by reputable RTOs and contain the nationally recognised training logo, they each verify that a candidate has met the Units of Competency required to work in their industry occupation. These qualifications do not indicate how you have obtained the qualification (i.e. through RPL), and are exactly the same as a qualification received from a training provider through any other means.

Get Qualified Australia allows you up 3 months to complete the RPL process, however the actual duration is dependent on the length of time it takes you to provide your evidence. While this is generally 4 weeks, the quicker you submit your evidence, the sooner the process will be completed.

Once all the required evidence has been submitted and your evidence has been assessed, the RTO will then review and issue your qualification within 2-4 weeks, provided that no further evidence is required. This makes it possible for you to achieve your qualification in as little as 1 month, and up to 3 months.

Requests for extensions beyond the allotted 3 month period will be considered on an individual case basis.

While our Customer Service Agents will determine the best evidence for your portfolio, evidence generally takes the form of:

  • Resume/CV
  • References
  • Performance Appraisals
  • Portfolio/work samples
  • Photographic and video evidence
  • Education, training and qualifications
  • Job Description
  • Policies and Procedures
  • Workplace communication
  • Bookkeeping and financial records

Click here to learn more about the types of evidence you can provide.

 

The options are really endless. Most people use qualifications to enhance their careers, from achieving a promotion or pay rise, to climbing organisational ranks and getting new job opportunities. In fact, qualifications have shown to increase employability by 11%, and result in promotions 42% of the time.

Other people might use their qualification to improve visa or migration prospects, access postgraduate study, open up their own businesses, meet regulatory requirements, or obtain a licence in their industry or occupation.

Please note that while our qualifications may help you meet minimum licensing requirements, only your state’s relevant licensing authority may issue you your licence. For more information about trades licensing, click here.

To be awarded the MSF30413 Certificate III in Glass and Glazing, competency must be achieved in

  • twenty-four (24)  units of competency:

  • eleven (11)  core units of competency

  • thirteen (13)  elective units of competency.

Note: Units marked with an asterisk have one or more prerequisites and must be considered in the total number of units. Please refer to individual units for details.

CORE UNITS 

HLTAID003 Apply first aid

MSAENV272B Participate in environmentally sustainable work practices

MSAPMSUP102A Communicate in the workplace

MSAPMSUP106A Work in a team

MSFGG2001 Use glass and glazing sector hand and power tools

MSFGG2003 Operate glass freefall rack and table

MSFGG2004 Process thin glass by hand

MSFGG2005 Apply basic glass handling

MSFGG2006 Move single glass sheets by mechanical means

MSFGG2007 Process glass by basic machines

MSFGN2001 Make measurements and calculations

ELECTIVE UNITS 

Select thirteen (13)  units from Groups A, B, C, D, E and F as specified below.

Group A  

Select a minimum of one (1)  unit from Group A.

CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry

MSAPMOHS200A Work safely

Select a minimum of seven (7)  units from Groups B, C or D (at least six (6)  units must be selected from one group to achieve that specialisation and chosen units must include those marked with ‘#’ in each specialist group)

Group B Glass Processing 

MEM30031A Operate computer-aided design (CAD) system to produce basic drawing elements

MSFFM3024 Construct jigs and fixtures

MSFGG3001 Store and handle glass

MSFGG3003 Move block and bulk glass sheet by mechanical means #

MSFGG3004 Process thick glass #

MSFGG3005 Process glass by semi-automatic machines

MSFGG3006 Process glass by automatic machines

MSFGG3007 Apply and handle films and coated glass

MSFGG3008 Form glass

MSFGG3009 Apply patterns and designs to glass

MSFGG3010 Set up and operate glass laminating equipment

MSFGG3011 Set up and operate glass toughening equipment

MSFGG3012 Set up and operate glass mirroring equipment

MSFGG3013 Set up and operate insulated glass unit manufacturing equipment

Group C Glazing 

MSFGG2002 Use, handle and store glass and glazing products and consumables

MSFGG2008 Glaze and re-glaze residential windows and doors #

MSFGG2009 Fabricate and assemble frames

MSFGG2010 Fabricate and install insect and security screens

MSFGG3002 Assess glass and glazing requirements #

MSFGG3015 Fabricate and install shower screens and wardrobe doors

MSFGG3016 Fabricate and install residential windows and doors

MSFGG3017 Fabricate and install commercial glazing

MSFGG3018 Prepare and install architectural engineered glazing

MSFGG3019 Conduct commercial and structural re-glazing

MSFGG3020 Use static machines for aluminium and unplasticised polyvinyl chloride (uPVC) fabrication

MSFGG3021 Prepare and install mirrors and glass splashbacks

Group D Architectural Stained Glass 

MSFGG3014 Construct and repair leadlight panels

MSFSL2001 Assemble leadlight and stained glass components #

MSFSL3001 Apply product and material knowledge to leadlight and stained glass operations

MSFSL3002 Protect stained glass and leadlighting

MSFSL3003 Fabricate and install residential leadlight and stained glass windows and doors

MSFSL3004 Prepare and install architectural engineered leadlight and stained glass

MSFSL3005 Paint and fire glass #

Group E  

A maximum of four (4)  units, may be selected from:

  • units not previously selected from Groups A, B, C or D
  • a maximum of three (3)  units from Group F, below
  • a maximum of four (4)  relevant units from this Training Package, other endorsed Training Packages and accredited courses, where those units are available at Certificate II level (maximum 1 unit), Certificate III level (maximum 4 units) or Certificate IV level (maximum 1 unit).

Units selected from other Training Packages and accredited courses must be relevant to the qualification outcome and not duplicate units available within this qualification.

Group F 

BSBWHS401A Implement and monitor WHS policies, procedures and programs to meet legislative requirements

CPCCCM2001A Read and interpret plans and specifications

CPCCCM2006B Apply basic levelling procedures*

CPCCCM2010B Work safely at heights*

CPCCOHS1001A Work safely in the construction industry

CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry

CUVACD301A Produce drawings to communicate ideas

CUVACD201A Develop drawing skills to communicate ideas

CUVCAL301A Produce calligraphy

MSAPMSUP201A Receive or despatch goods

MSFBA2009 Construct metal louvre and canopy-hooded style awnings

MSFFM3009 Produce manual and computer-aided production drawings

MSFGG4003 Manage glass industry production scheduling

MSFGN3001 Read and interpret work documents

MSFGN3002 Estimate and cost job

TAEDEL404A Mentor in the workplace

TLID2003A Handle dangerous goods/hazardous substance

TLILIC2001A License to operate a forklift truck

Not applicable

This qualification does not require any licensing.

Visit Get Qualified Australia’s Trade Licensing page for more information surrounding licensing

  • OZTECH Trade Training College PTY LTD - Provider Code 40997

Did you know that the Australian Qualifications Framework (AQF) perfectly aligns certificate and diploma level qualifications with higher education? This means that it’s now possible to receive exemptions and fast track university degrees using diploma and above level qualifications.

Enrol in one of our qualifications today, and unlock the potential to seek maximum unit exemptions for your desired Graduate Diploma, Bachelor, or Masters Degree in a cost, time and effort-effective way. Speak with one of our Skills Recognition Consultants today or complete our Free Skills Review to discover the highest qualification level you’re eligible for.
  Learn more

Pocket your savings by accessing our qualifications at a fraction of the cost. Select your preferred payment plan and activate your special offer.
  Learn more